Aiden™ Instructional Videos
Learn how to control your high by mastering the Blend Pen™ with these tutorial videos. If you're experiencing issues with your device, please review our FAQ, or reach out with any additional questions.
Charging the Device
Ideally, fully charge the devices before first use (we understand you many want to dive right in!). Use the USB-C cable provided. The lights will flash while charging, and turn solid GREEN when fully charged.
Loading the Device
Remove the mouthpiece of Blend Pen™ and screw on one or two cartridges until you feel a vibration. Do NOT over tighten the cartridge. Place the mouthpiece back on the Blend Pen™ with the window facing the same side of the buttons.
Cartridge Settings
Set each cartridge to the desired level by clicking the button directly below the corresponding cartridge.
- 3 Lights - High temperature (3.5v)
- 2 Lights - Medium temperature (3.2v)
- 1 Light - Low temperature (2.9v)
- Zero Lights - Off
Vaping the Device
ACTIVATION: The device is 'inhale activated'. This means there are no buttons to push, simply place your lips on the device from the mouthpiece (top of the window), and inhale.
HAPTIC FEEDBACK: When you first draw on the device, you will feel a short vibration to indicate the device has been activated, and then a vibration for every second after. This is designed to help you find your perfect dose.
RECOMMENDED USE: We recommend starting with a 1 or 2 second draw. Please allow time for your body to adjust and feel any effects of what's being consumed.
BATTERY CAPACITY: Long lasting battery with 400 mAh capacity. Remember to double click either button to check on the battery life.
BLEND CONTROL: Adjust each cartridge setting and find your perfect blend for different experiences. Keep track of the number of vibrations you feel.
Child Safety Lock
To lock the Blend Pen™ hold down both buttons for 5 seconds. To unlock, hold both buttons again for 5 seconds.
Preheating Clogged Carts
Clogged cartridge? Try preheating your cartridge. To do so, hold the corresponding button for more than 2 seconds. Continue holding and the flashing red lights indicates the cartridge is being activated - which may help with the clogged cart. Pro tip - You may want to try to remove the mouthpiece of the Blend Pen™ and draw directly on the cartridge that is clogged.
Battery Life Indicator
To check the battery life, double click either button.
- Green > 100-50%,
- Yellow - 50%-25%
- Red - Less than 25%
The device will show a red light and vibrate after each pull when the battery has less than 10% battery remaining.
Cartridge Too Long?
Having troubles closing the mouthpiece due to your cartridge being (just a bit) too long? Try to remove the rubber seal inside the mouthpiece. You might need a pair of tweezers!
